Stardew Valley Hueforge

HueForge of Stardew Valley. Project: StardewValley.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 134.18x200mm in sizeYou may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 2.24mm and the Actual Thickness is 1.92318mm #000000 PLA BambuLab Matte Charcoal Transmission Distance: 0.6 #de4343 PLA BambuLab Matte Scarlet Red Transmission Distance: 2 #fec600 PLA BambuLab Basic Sunflower Yellow Transmission Distance: 4.4 #ffffff PLA BambuLab Matte Ivory White Transmission Distance: 3.5This print uses 4 unique filamentsSwap Instructions: Start with Charcoal At layer #8 (0.72mm) swap to Scarlet Red At layer #13 (1.12mm) swap to Sunflower YellowBorder Only Colors from here until the end. At layer #20 (1.68mm) swap to Ivory White for the rest.