Starfield watch stand

Heavily recommend the organic tree supports (I used PrusaSlicer 2.6.0) but I also recommend going to Print Settings > Support material and checking "support on build plate only".

I used support cubic infill on 15%, add more infill if you want it to feel more solid/hefty but 15 feels good to me in hand :)

I did 3 perimeters, with 3 top and bottom solid layers, 0.6mm shell thickness.

I've done no post processing other than taking off the tree supports, but I would suggest sanding, priming and painting in Starfield colours for the full experience, ready for that Starfield watch!