Slicer Discord
Starfish Flexi V2 – Modelo 3D imprimible de MyMiniFactory MyMiniFactory
Toys & Games

Starfish Flexi V2

0 Descargas
14 Likes
0 Makes
Ver Modelo
Starfish Flexi V2 Here's V2 of the starfish flexi. After a report of breakage I've completely rebuilt the model. Now this could be heavy handedness but ive made adjustments anyway. I've added approx 0.2mm around all critical areas, there are some minor differences in this version, some of the pieces are different and in different places but it still retains the same functionality. Ive also adjusted the eyes so they sit above model height for a layer pause. for single colour printers. the pauses are as follows. layer 98 for black layer 101 for white If you've not experienced any issue with the previous version then you can continue to use. I would still not recommend silk filaments for any sort of flexi, it's widely known to be weaker than normal pla. If using silk then really look and experiment with temps to make sure adhesion is at its best.  Mattes are better but still not as strong as normal pla 0.2 layer, 15% infill
Categoría
Toys & Games
Fuente
MyMiniFactory
Publicado
Lo que necesitas para imprimir: Principiante Baja confianza
¿Por qué?
diseño print-in-place
Print-in-place
Soportes 1/3
Ensamblaje 0/3
Ajustes 1/3
Tamaño de cama 0/3
Postproceso 0/3
Impresora
FDM / FFF
Formato de archivo
STL
Material
PLA, Silk PLA
Software
Cura, PrusaSlicer o similar
Mismo diseñador, más plataformas

ENIQUE3D también publica en

170 modelos adicionales en 2 plataformas más

Verificado por coincidencia de títulos de modelos entre plataformas.
Aún no hay valoraciones
Aún no hay comentarios – ¡sé el primero!

Modelos similares

6 Sugerencias
Feed Blog Slicer Calculadora Búsqueda por imagen Enviar Contacto Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Añadir a colección