MakerWorld
Hueforge & Lithophane
Model downloaden
Stargate Hueforge
50
Downloads
26
Likes
23
Makes
Stargate Hueforge Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x112.5mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 1.6mmFilaments Used: PLA BambuLab Matte Charcoal Transmission Distance: 0.6 PLA BambuLab Basic Blue Transmission Distance: 4 PLA BambuLab Matte Ice Blue Transmission Distance: 3.5This print uses 3 unique filamentsSwap Instructions: Start with Charcoal At layer #12 (1.04mm) swap to Blue At layer #15 (1.28mm) swap to Ice Blue for the rest.
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
