Thingiverse
Starlink Cable Keeper
door bmicallef
3
Downloads
2
Likes
0
Makes
I was SOOOOooooooo excited to receive my Starlink yesterday, and almost immediately crushed by an intermittent problem regarding the 'startlink' antenna disconnecting from the router during setup.
The cable Starlink provides uses a proprietary connector that simply pushes into place and does not really have a means to 'snap-in' for a secure fit. Apparently this is a known and common issue that is covered in the following link by Noah Clark. Thanks Noah!
https://www.starlinkhardware.com/how-to-fix-the-starlink-disconnected-error/
After experimenting with the cable it became pretty clear to me that the slightest movement of the cable could unseat the connector, leading to a very unreliable connection.
This 'cable keeper' is a collar that slides over the lower portion of the Starlink mast, and creates a spacer between the Starlink mast and whatever mount or stand your are connecting it to.
The spacer has just enough room for the cable to pass through but holds the sides of
The cable Starlink provides uses a proprietary connector that simply pushes into place and does not really have a means to 'snap-in' for a secure fit. Apparently this is a known and common issue that is covered in the following link by Noah Clark. Thanks Noah!
https://www.starlinkhardware.com/how-to-fix-the-starlink-disconnected-error/
After experimenting with the cable it became pretty clear to me that the slightest movement of the cable could unseat the connector, leading to a very unreliable connection.
This 'cable keeper' is a collar that slides over the lower portion of the Starlink mast, and creates a spacer between the Starlink mast and whatever mount or stand your are connecting it to.
The spacer has just enough room for the cable to pass through but holds the sides of
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!