Starlink Mini Cable Wrap

To start with, I've settled on using the Starlink Mini pole adapter plate as my standard way of attaching to a stand. This lets me use various adapter pucks instead of an actual pole, to mount the Starlink Mini on a tripod, Quick Clamp, or Painters pole. See my adapter pucks here:https://makerworld.com/en/models/1837978-starlink-mini-adapters-tripod-painterpole-clamp#profileId-1963251 But, the pole adapter plate is a bit hard to remove if I want to disconnect the cable. Plus I needed a way to safely store the cable and power brick when not in use. So I designed this plate that bolts to the back of the pole adapter plate, allows you to wrap the cable around it, and lets you snap the power brick into place underneath it. I attached the plate using 6mm bolts - two 30mm long and one 10mm long. Note that the short one is used to allow the pole clamping screw to clear it, so you can tighten or loosen that screw without removing the cable wrap plate. But, as can be seen in one of my photo