Starry Night Bookmark Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 47,68x160mm in size at 80%You may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mm Filaments Used: PLA Generic Black Transmission Distance: 0.3 PLA Generic Blue Transmission Distance: 4 PLA Generic Beige Transmission Distance: 8 PLA Generic White Transmission Distance: 10 This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #7 (0.64mm) swap to Blue At layer #13 (1.12mm) swap to Beige At layer #23 (1.92mm) swap to White for the rest. Printed at 100% Size but as i see the 80% Size is good enuth (pic on the right)takes about 1.2h to print with