Starship Launch |HueForge

This is my Hueforge Model of the 2nd Starship test flight launch. I used orange, black and white PLA, although my white was a bit too strong and wasnt really letting much of the colour beneath through it. For this model here, I made it so the white isnt that strong anymore as in my printed object. If you have an AMS, just load the file in and check that the colors on the right after slicing match the ones listed below.If you dont have an AMS, insert layer pauses and do manual filament changes at the layers listed below, otherwise you'll find help on Youtube. You can of course also use other colors or manufacturers, but it will look a bit different. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmFilaments Used: PLA PolyTerra Charcoal Black Transmission Distance: 0.3 PLA BambuLab Basic Orange Transmission Distance: 5 PLA BambuLab Basic Jade White Transmission Distance: 3Swap Instructions: Start with Charcoal Black At layer #7 (0.64mm) swap to Orange At