Thingiverse
Start Base MultiGP Style
von GhostMaster
1
Downloads
1
Likes
0
Makes
Simple Start base with no degrees of inclination, can be easy transported and put together, nothing fancy.
It's 250mm by 120mm (inside space, plus 30mm for each side).
Should fit every 5" or bigger.
You should print 2x Sides and 2x Joiners to make it work properly, it's recommend to add some foam with tape to the top to properly fix the quad on the lauch pad.
Foam tape: http://bit.ly/2Mggx2W
Help me using my link to buy things at banggood: http://bit.ly/2mqIwyb
It's 250mm by 120mm (inside space, plus 30mm for each side).
Should fit every 5" or bigger.
You should print 2x Sides and 2x Joiners to make it work properly, it's recommend to add some foam with tape to the top to properly fix the quad on the lauch pad.
Foam tape: http://bit.ly/2Mggx2W
Help me using my link to buy things at banggood: http://bit.ly/2mqIwyb
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
