Thingiverse
StarWars Lightsaber Emitter
door remonkok
8
Downloads
9
Likes
0
Makes
My very own 3D model of a Lightsaber from the epic franchise named StarWars!!
This Lightsaber is 200mm in height. 40mm deep and 45 mm wide. Big enough for an adults hand or just as a decorative prop.
I self printed one as a test and one for a friend and I used 50% infill for more strength and with 60 support structure. Print speed was 60mm/sec and it took me on a Creality 3D pro around 15 hours too print. Print Material was 1.75mm PLA with printing quality 0.2mm.
If any problems with the model, please let me know and if you made one please show it too the world :D
This Lightsaber is 200mm in height. 40mm deep and 45 mm wide. Big enough for an adults hand or just as a decorative prop.
I self printed one as a test and one for a friend and I used 50% infill for more strength and with 60 support structure. Print speed was 60mm/sec and it took me on a Creality 3D pro around 15 hours too print. Print Material was 1.75mm PLA with printing quality 0.2mm.
If any problems with the model, please let me know and if you made one please show it too the world :D
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!