Starwars

Project: join.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 133.2x199.8mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.3mmFilaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA Bambu Red Transmission Distance: 4.2 PLA Bambu Glow Yellow Transmission Distance: 6.7This print uses 3 unique filamentsSwap Instructions: Start with Black At layer #8 (0.72mm) swap to Red At layer #17 (1.44mm) swap to YellowBorder Only Colors from here until the end. At layer #27 (2.24mm) swap to Red for the rest.