stary fox hueforge

you can use the settings provided for any of the 3 raw files but i would advise using the normal V2V2:Print at 100% infill with a layer height of 0.08mm with a base layer of 0.24mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Blue Transmission Distance: 4 PLA BambuLab Basic Jade White Transmission Distance: 5 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic Yellow Transmission Distance: 6Swap Instructions: Start with Black At layer #7 (0.72mm) swap to Blue At layer #11 (1.04mm) swap to Jade White At layer #13 (1.2mm) swap to Blue At layer #16 (1.44mm) swap to Black At layer #18 (1.6mm) swap to Red At layer #20 (1.76mm) swap to Yellow At layer #29 (2.48mm) swap to Jade White for the rest.with ams light add pause at layer 17 and swap blue for redV2 inverted:Print at 100% infill with a layer height of 0.08mm with a base layer of 0.24mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Red Transm