Thingiverse
Steady Cam
di GO3R
12
Download
3
Likes
0
Makes
I designed this steadycam rig for a co-worker and wanted it to share with you so you can print it yourself.
You need to print every part one time, except for the "Outside_Piece" you can choose to print this one in one Piece or in two pieces ("Outside_Piece"+"Grip" or "Outside_Piece_One_Piece").
You also need four M8x25mm Screws (i didnt had those so i sawed 35mm long screws off), seven M8 (preferably) locknuts and four 608 bearings. I filled the counterweight with concrete but you can use everything heavy. The long rod is 450mm long and with an M8 thread. This size doesnt matter much, use what you have.
You need to print every part one time, except for the "Outside_Piece" you can choose to print this one in one Piece or in two pieces ("Outside_Piece"+"Grip" or "Outside_Piece_One_Piece").
You also need four M8x25mm Screws (i didnt had those so i sawed 35mm long screws off), seven M8 (preferably) locknuts and four 608 bearings. I filled the counterweight with concrete but you can use everything heavy. The long rod is 450mm long and with an M8 thread. This size doesnt matter much, use what you have.
GO3R pubblica anche su
1 modelli aggiuntivi su altre 1 piattaforme
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!
