Thingiverse
Steam Deck Dock (Stand)
von tonystockert
11
Downloads
11
Likes
0
Makes
45° feels better for desktop mode (close up, with a keyboard & mouse) and 30° at a more casual distance, like when using a controller.
Print with thick walls and a decent amount of infill to give it some weight.
Updated: Added multiple shorter versions. Personally prefer the original, as it's easier to center on the registration pins using the screen edges as a guide, but these are slightly more portable and can be printed on smaller beds.
ALSO NOTE: the smaller down you go from the original, more force is concentrated on the front lip, especially the 45° versions. INCREASE WALL THICKNESS, at least until the front lip is printed solid. Always consider the strength of the material you're using and adjust accordingly. (Be smart, don't break your Deck!)
Print with thick walls and a decent amount of infill to give it some weight.
Updated: Added multiple shorter versions. Personally prefer the original, as it's easier to center on the registration pins using the screen edges as a guide, but these are slightly more portable and can be printed on smaller beds.
ALSO NOTE: the smaller down you go from the original, more force is concentrated on the front lip, especially the 45° versions. INCREASE WALL THICKNESS, at least until the front lip is printed solid. Always consider the strength of the material you're using and adjust accordingly. (Be smart, don't break your Deck!)
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
