Thingiverse
Steamdeck Docking Station
door ioneng
3
Downloads
2
Likes
0
Makes
This Steam Deck dock is designed for Dockteck branded 7in1 USB-C hub with 4k 60hz hdmi output. (Amazon link at bottom).
To mount the hub, you simply slide it in.
The tilted version provides a few extra millimeters of height underneath the hub in order to relief tension in the short USB-C cable. The tilt angle also allows any attached cable to gently rest on your desk. To minimize blockage to the vent, I added a few channels to the front of the dock so air can be sucked in from the sides.
The no frill flat version is more compact and since I use an adapter, cable length is not a concern at all.
Please let me know if you need this to be printed. I don't mind setting up a page on Etsy.
Link to the hub:
https://www.amazon.com/gp/product/B09491F17Q/
To mount the hub, you simply slide it in.
The tilted version provides a few extra millimeters of height underneath the hub in order to relief tension in the short USB-C cable. The tilt angle also allows any attached cable to gently rest on your desk. To minimize blockage to the vent, I added a few channels to the front of the dock so air can be sucked in from the sides.
The no frill flat version is more compact and since I use an adapter, cable length is not a concern at all.
Please let me know if you need this to be printed. I don't mind setting up a page on Etsy.
Link to the hub:
https://www.amazon.com/gp/product/B09491F17Q/
ioneng publiceert ook op
7 extra modellen op 1 andere platforms
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
