Slicer Discord
Steeldart Point Cones – 3D printable model from MakerWorld MakerWorld
Sport & Outdoors

Steeldart Point Cones

56 Downloads
15 Likes
31 Makes
Go to Model
Instead of ordering them online I created these small cones, that can be slid over the tips of your steeldarts.They are meant to reduce the chance of bounces due to the beginning of the barrel hitting the flights of the other darts already in the board.There a re 3 versions:Version 1 is of low height and has a filleted inner part to slide slightly over the barrel of the dartVersion 2 is of low height and has a flat base to lay flat on the barrel of your dartsVersion 3 is taller and has a filleted inner part to slide slightly over the barrel of the dartI do not have a .2mm nozzle, so I printed these with my P1S and the default .4mm nozzle.But if you have, I would recommend using a .2mm nozzle. The Darts shown in the pictures are the Red Dragon Amberjack Pro 24g and the Red Dragon Defender 24g.
Category
Sport & Outdoors
Source
MakerWorld
Published
Updated
What you need to print this: Intermediate Low confidence
Why?
supports needed
Single piece Supports required
Supports 2/3
Assembly 0/3
Settings 1/3
Bed size 0/3
Post-process 0/3
Printer
FDM / FFF
File format
STL
Material
Software
Cura, PrusaSlicer, or similar
No ratings yet
No comments yet – be the first!

Similar Models

6 Suggestions
Feed Blog Slicer Cost Calculator Image Search Submit Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Add to Collection