Steeping Mixer

This will turn about 60 degrees wait a minute and repeat, another words it not a continuous motion. It is for steeping ejuice.

Print Body with no support with flat side down.
I would not print this at more than 15%. Use a Outline/Perimeter Shell of 4 or more so the motor key will be strong. If using Simplify3D or other programs that allow you to have custom setting per layers, I would use Outline/Perimeter Shell of 4 or more for the first 7mm for the body to increase that motor key hole.

Print Sides with support.

If you notice the picture has the hexagon done wrong, bees would not approve. I fixed it in the body I uploaded.

Parts needed.

Stepper Motor 28BYJ-48 https://www.amazon.com/Elegoo-28BYJ-48-ULN2003-Stepper-Arduino/dp/B01CP18J4A/ref=sr_1_3?ie=UTF8&qid=1509504146&sr=8-3&keywords=28byj-48
Arduino Uno
Code https://github.com/sprenkle/SteepingMixer
2 Pan Head Phillips #4x1/2 in screws
Skateboard/Spinner bearing
Power adapter for Arduino Uno
4 small tie wra