Steering wheel wall mount

This is simple and functional wall mount for custom steering wheels. It includes 3 parts .Slicing I suggest you print each part separately. I used material ASA (ABS or PETG should be fine or even maybe PLA, but i went with a little bit safer choice).Use strong infill (50-100%), especialy if you are going to use PLA, which i dont reccomend.Put supports on, i used tree automatic suports and 0.16mm z distance and for ASA material it worked perfectly.Print pin on 100% infillPin has a little more tolerance space for the cross hole, exactly because of the suports and vertical holes.Orientation on the print bedInstallation First part goes directly in the wall with two screws. Then you assemble stering wheel to the second part. Holes should fit perfectly, if you added inserts the correct way. When you have part 2 and wheel assembled you just "plug in" part 2 into part 1 on the wall and insert the pin in. If pin dont fit than you should try printing pin at 99-97% scale. !!! Be careful w