Stellar Bookmark

A stellar bookmark made with HueForge, 16 cm. I’ve uploaded a NO AMS version where you need to change the filament manually after each pause: Start with blue then:1st pause = cyan2nd pause = White3rd pause = Pink4th pause = WhitePrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 45x159.67mm in sizeYou may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 2.24mm and the Actual Thickness is 2.08mm Filaments Used: #00358e PLA BambuLab Basic Blue Transmission Distance: 4 #0086d6 PLA BambuLab Basic Cyan Transmission Distance: 3.5 #ffffff PLA BambuLab Basic Jade White Transmission Distance: 5 #ff749e PLA+ Esun Pink Transmission Distance: 5 This print uses 4 unique filamentsSwap Instructions: Start with Blue At layer #8 (0.72mm) swap to Cyan At layer #11 (0.96mm) swap to Jade White At layer #13 (1.12mm) swap to Pink At layer #19 (1.6mm) swap to Jade White for the rest.