Steph Curry Hueforge

Project: stephcurry.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 134.17x178mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.3mm Filaments Used:PLA+ Sunlu Black Transmission Distance: 0.6PLA+ Sunlu Red Transmission Distance: 6PLA+ Sunlu Yellow Transmission Distance: 10PLA+ Esun Bone White Transmission Distance: 5This print uses 4 unique filaments Swap Instructions:Start with BlackAt layer #8 (0.72mm) swap to RedAt layer #13 (1.12mm) swap to YellowAt layer #20 (1.68mm) swap to Bone White for the rest. If you resize do not use uniform resize. Leave the z the same.