Stepper Motor Cooling Shroud for Hypercube Evolution

This shroud is designed for the Hypercube Evolution printer.

Features:

- Can be installed without printer disassembly
- Mounts a 40 x 10mm Fan

Material:
- 6 M3 x 16mm screws (4 for the fan and 2 for the shroud)
- 2 M5 x 8mm with Hammer Head nuts.
- [Noctua NF-A4x10 FLX](https://smile.amazon.com/gp/product/B009NQLT0M/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1) or equivalent size.

A thicker fan can be used, but the mounting screw length will need adjustment.
(Maximum screw length = Fan thickness + 6mm)

Update: I installed this originally on my old motors, which continually got hot after installing TMC2208 drivers. The fans cooled the motors but the damage had already been done. I replaced the motors, and have been running with these coolers on my HEVO for more than a month. The motors now run cool.