Thingiverse

Sticky Figure

von xmaspako

26 Downloads

27 Likes

0 Makes

Simpatico appendiabiti realizzato tutto d'un pezzo.
L'ho realizzato con un layer da 0.3 mm, 3 linee perimetrali (1.2mm, avendo l'ugello da 0.4mm) ed è veramente molto resistente (come potete vedere in foto).
Sbizzarritevi con i colori!

Nota: per il fissaggio a parete, ho usato i Fischer SX 5 S (diametro di foratura 5mm). A tale scopo, ho fornito anche il PDF che potete utilizzare come maschera per i fori.

Friendly coat hanger, made by only one piece..
I made it using 0.3 mm layers, 3 perimeter lines (total 1.2 mm, since nozzle is 0.4 mm) and it seems to be very strong (as you can appreciate in pictures).
Let's have fun with colors!

Note: for the wall mounting, I used Fischer SX 5 S (with a drilling diameter by 5mm). For your convenience, I provided also a PDF that you can use as drilling mask.

appendiabiti appendino attaccapanni coat hanger hanger holder omino stick figure stick man appendiabiti appendino attaccapanni coat hanger hanger holder omino stick figure stick man

Quelle

Thingiverse

Was du zum Drucken brauchst: Anfänger Niedrige Konfidenz

Warum?

Print-in-place-Design · 0.30mm Schichten

Print-in-place

Supports 1/3

Zusammenbau 0/3

Einstellungen 1/3

Druckbett 0/3

Nachbearbeitung 0/3

Drucker

FDM / FFF

Dateiformat

STL

Material

Schichthöhe

0.3 mm

Software

Cura, PrusaSlicer o. Ä.

Noch keine Bewertungen

Noch keine Kommentare – sei der Erste!

Sticky Figure

Zur Sammlung hinzufügen