Thingiverse
Stimmy
1
Download
6
Likes
0
Makes
It was originally a test to research how to achieve "organic" textures with 3D printing when doing slight reliefs without supports, which turned out to have a good result. And one day, a friend pointed out to me that it could make a pretty good stimtoy.
So enjoy Stimmy wearing as a ring, striking one side then turn it and do it again!
I printed it in ABS, PLA normal and "silk metallic", also managed to print it in Flexi PLA (but that was hard to achieve).
Use default settings for Infill.
No skirt nor supports needed (REALLY DON'T USE SUPPORTS, IT WOULD GO AGAINST THE PURPOSE OF IT)
You can print it "roughly", I printed it many times using "Draft" (0.25mm resolution) or "Super Draft" (0.30mm resolution) settings, and augmenting the print's default speed.
The walls are thick enough to size it down to make it a child's ring size.
Have fun with Stimmy!
- I designed it and used to sell it; I now share the model but my company is still the only owner of the selling rights. However, shoul
So enjoy Stimmy wearing as a ring, striking one side then turn it and do it again!
I printed it in ABS, PLA normal and "silk metallic", also managed to print it in Flexi PLA (but that was hard to achieve).
Use default settings for Infill.
No skirt nor supports needed (REALLY DON'T USE SUPPORTS, IT WOULD GO AGAINST THE PURPOSE OF IT)
You can print it "roughly", I printed it many times using "Draft" (0.25mm resolution) or "Super Draft" (0.30mm resolution) settings, and augmenting the print's default speed.
The walls are thick enough to size it down to make it a child's ring size.
Have fun with Stimmy!
- I designed it and used to sell it; I now share the model but my company is still the only owner of the selling rights. However, shoul
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!
