Stitch flying

Project: th.jpegPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 130x130mm in size You may print at higher layer heights below the Min Depth of 0.24mm The Max Depth is 2mm and the Actual Depth is 2mm Filaments Used:PLA PolyTerra Charcoal Black Transmission Distance: 0.3PLA PolyTerra Sapphire Blue Transmission Distance: 0.3PLA PolyTerra Sakura Pink Transmission Distance: 2.8PLA PolyTerra Cotton White Transmission Distance: 2.5This print uses 4 unique filaments Swap Instructions:Start with BlackAt layer #7 (0.64mm) swap to BlueAt layer #16 (1.36mm) swap to PinkAt layer #20 (1.68mm) swap to White for the rest.