stitch hueforge

Project: stitch sans axelle.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA+ Sunlu Blue Transmission Distance: 4 PLA+ Esun Space Blue Transmission Distance: 3.5 PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 4 unique filame