Thingiverse
Stitch Hueforge
von Maumap
6
Downloads
19
Likes
1
Makes
Project: Stitch
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 150x207.38mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm
Swap Instructions:
Start with Black
At layer #10 (0.88mm) swap to Blue
At layer #17 (1.44mm) swap to Red
At layer #19 (1.6mm) swap to White for the rest.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 150x207.38mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm
Swap Instructions:
Start with Black
At layer #10 (0.88mm) swap to Blue
At layer #17 (1.44mm) swap to Red
At layer #19 (1.6mm) swap to White for the rest.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
