Slicer Discord
Stitch – 3D-Druckmodell von MakerWorld MakerWorld
2D Art

Stitch

62 Downloads
49 Likes
11 Makes
Zum Modell
Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mmThe Model is 150.5x187.46mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.3mm Filaments Used: PLA+ IIID Max Black Transmission Distance: 0.2 PLA PolyLite Blue Transmission Distance: 4 PLA PolyLite Azure Blue Transmission Distance: 3 PLA PolyLite Aqua Blue Transmission Distance: 3.2 PLA+ GST3D White Transmission Distance: 5.8This print uses 5 unique filamentsSwap Instructions: Start with Black At layer #11 (0.56mm) swap to Blue At layer #20 (0.92mm) swap to Azure Blue At layer #24 (1.08mm) swap to Aqua Blue At layer #28 (1.24mm) swap to White for the rest.
Kategorie
2D Art
Quelle
MakerWorld
Veröffentlicht
Aktualisiert
Was du zum Drucken brauchst: Anfänger Niedrige Konfidenz
Einteilig
Supports 1/3
Zusammenbau 0/3
Einstellungen 1/3
Druckbett 0/3
Nachbearbeitung 0/3
Drucker
FDM / FFF
Dateiformat
STL
Material
PLA
Software
Cura, PrusaSlicer o. Ä.
Noch keine Bewertungen
Noch keine Kommentare – sei der Erste!

Ähnliche Modelle

6 Vorschläge
Feed Blog Slicer Kostenrechner Bildersuche Einreichen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Zur Sammlung hinzufügen