Stitch Skywalker

Project: _3f746d66-d06b-4bc1-a536-2d8b65daafa1.jpg Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x200mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.2mm Filaments Used: PLA PolyTerra Cotton White Transmission Distance: 2.5 PLA PolyTerra Charcoal Black Transmission Distance: 0.3 PLA PolyTerra Arctic Teal Transmission Distance: 0.5 This print uses 3 unique filaments Swap Instructions: Start with Cotton White At layer #5 (0.48mm) swap to Black At layer #6 (0.56mm) swap to green At layer #16 (1.36mm) swap to White for the rest.