Thingiverse
STM32 NUCLEO STLink Box
par mirabatek
15
Téléchargements
24
Likes
0
Makes
Hi,
this is the case for STLink-V2 programmer which is part of STM32 NUCLEO boards (64 pins or 144 pins). The programmer can be separated from the board and used as standalone device.
All available pins are exposed (SWD port, TX, RX, GND, ...).
You will need 4 M2x8mm screws to hold top and bottom part together.
If you want contrast label on the top, change filament color after 0.6mm height for at least two layers.
this is the case for STLink-V2 programmer which is part of STM32 NUCLEO boards (64 pins or 144 pins). The programmer can be separated from the board and used as standalone device.
All available pins are exposed (SWD port, TX, RX, GND, ...).
You will need 4 M2x8mm screws to hold top and bottom part together.
If you want contrast label on the top, change filament color after 0.6mm height for at least two layers.
mirabatek publie également sur
164 modèles supplémentaires sur 2 autres plateformes
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !
