Stonehenge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmFilaments Used: PLA+ Sunlu Black Transmission Distance: 0.6 PLA+ Sunlu Red Transmission Distance: 6 PLA+ Sunlu Sky Blue Transmission Distance: 4 PLA+ Sunlu Pure Yellow Transmission Distance: 5Swap Instructions: Start with Black At layer #7 (0.64mm) swap to Red At layer #11 (0.96mm) swap to Sky Blue At layer #15 (1.28mm) swap to Pure Yellow for the rest.