Slicer Discord
Stool for toddlers – Modelo 3D imprimible de MakerWorld MakerWorld
Other House Models

Stool for toddlers

89 Descargas
87 Likes
14 Makes
Ver Modelo
Small stool for small children. Seat height on the one in the picture is about 21 cm but can be made lower or a little higher. The seat is 20 cm in diameter.I used the print settings in the file, but the model was filled with plaster. If you don't want to fill your model you will need to add extra layers to get the strength needed. If you do please share your print settings and results so others can get it right easier. The one in the picture i made in abs-gf. The seat is filled with plaster of paris for extra strength. This makes it very strong and hard so the seat doesn't flex. The legs are 20 mm diameter oak. I include a jig for sawing the right angle. I used a thin bladed japanese draw saw. The foots of the legs i rounded with a router with 6 mm radius. I include the jigg I used for that. If you don't have a router you can instead use the saw jig with 2 angled cuts to get the ends flush with the floor. I used abs filament mixed with acetone to glue the legs to the seat.
Categoría
Other House Models
Fuente
MakerWorld
Publicado
Actualizado
Lo que necesitas para imprimir: Intermedio Baja confianza
Pieza única
Soportes 1/3
Ensamblaje 0/3
Ajustes 1/3
Tamaño de cama 0/3
Postproceso 1/3
Impresora
FDM / FFF
Formato de archivo
STL
Material
PLA, ABS
Postprocesado
Pegado
Software
Cura, PrusaSlicer o similar
Aún no hay valoraciones
Aún no hay comentarios – ¡sé el primero!

Modelos similares

6 Sugerencias
Feed Blog Slicer Calculadora Búsqueda por imagen Enviar Contacto Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Añadir a colección