Stool Frame w/connectors

This was needed as a frame for the legs of a remix of Pongo's 3piece stool seat (seat pieces can be found at https://www.thingiverse.com/thing:2022200)

The frame is made to be printed 3 times and have the individual pieces interlock with each other. This will keep the legs from splaying too far apart when you sit on the stool. I found that the frame would slide down the legs (narrowing the base) so it may need to have a rubber band to keep the frame at one level on each leg. No gluing is needed.

This was printed using a Monoprice Maker III, PLA, .3mm layer thickness, bed temp 65, hot end temp 225, fan speed 75%, 20% infill (printing this on it's side allowed for enough strength when connected with each other), using a skirt to prime the extruder.
All other settings were defaulted to Cura's normal settings.


This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/eaHhfUIhY3b