Storage Tray Top Mount for Robosource Robot Case

Increase the storage capacity of your Robosource robot case (53-11), by adding a storage tray (71-01) with latches (71-31) to the top of the case. With a set of 3D printed brackets, the storage tray will latch on top of the robot case, giving much needed additional storage space. Furthermore multiple trays can be latched and stacked to gain additional storage capacity.This design works well on the 53-11, stay tuned for an alternate design for the larger 53-12 and 53-13 Robot cases.Additional Hardware RequiredUnfortunately this design does require some additional hardware, but most VEX folks will have the required hardware to mount the parts to their robot case.The following hardware is required to mount to the case:(4X) 8-32x 1/2" length VEX screw or (33-33)(4X) 8-32 x 1" length VEX screw or (33-35)(8X) 8-32 thin nylock nuts (32-02)(4X) #8 flat washer (22-34)Assembly of partsJoin the two parts together using the 2 of the smaller screws and ny lock nuts. The nylock nuts have a t