Stormtrooper Hueforge Star Wars

Hueforge de un stormtropper con su arma Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x159.22mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mm Filaments Used:PLA smartfil negro Transmission Distance: 0.4PLA BambuLab Basic Blue Gray Transmission Distance: 3PLA BambuLab Basic Orange Transmission Distance: 5PLA smatfil White Transmission Distance: 6This print uses 4 unique filaments Swap Instructions:Start with negroAt layer #10 (0.88mm) swap to Blue GrayAt layer #12 (1.04mm) swap to OrangeAt layer #15 (1.28mm) swap to White for the rest.