Stormtrooper Target Practice

Project: Stormtrooper.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Base Thickness of 0.56mmThe Max allowed Thickness is 2.32mm and the Actual Thickness is 2.16mm Filaments Used: #131c23 PLA Geeetech Black Transmission Distance: 0.1 #4c5f71 PLA BambuLab Basic Blue Gray Transmission Distance: 3 #f5547c PLA BambuLab Basic Hot Pink Transmission Distance: 3.9 #fce300 PLA BambuLab Basic Yellow Transmission Distance: 6 #ffffff PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 5 unique filaments Swap Instructions: Start with Black At layer #11 (0.96mm) swap to Blue Gray At layer #15 (1.28mm) swap to Hot Pink At layer #17 (1.44mm) swap to Yellow At layer #19 (1.6mm) swap to Jade White for the rest.Please note if you are printing this directly from the app i have made changes to the print profile that will be undone so your print may look slightly different Boost