Stormtrooper with M4

Hueforge Stormtrooper. This is my first Hueforge so do be too critical please. I used all BambuLabs PLA Filament mostly matte. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 150.05x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.3mmFilaments Used: PLA BambuLab Matte Charcoal Transmission Distance: 0.7 PLA BambuLab Basic BambuLab Green Transmission Distance: 2 PLA BambuLab Matte Dark Green Transmission Distance: 0.8 PLA BambuLab Matte Dark Brown Transmission Distance: 2 PLA BambuLab Matte Latte Brown Transmission Distance: 1 PLA BambuLab Matte Ash Gray Transmission Distance: 1.3 PLA BambuLab Matte Ivory White Transmission Distance: 3.5This print uses 7 unique filamentsSwap Instructions: Start with Charcoal At layer #12 (1.04mm) swap to BambuLab Green At layer #13 (1.12mm) swap to Pine Green At layer #14 (1.2mm) swap to Dark Brown At layer #16 (1.36mm) swap to Latt