Stormtrooper with Red Blaster Fire

I actually do print all of the models I upload and that takes a time and filament. Visit my Patreon (in bio or http://patreon.com/JustBe3D) if you are interested in *exclusive* FREE and members only models or a commercial license to sell your physical prints of my models. Can be rescaled just remember not to change the Z axis.I print with a variable layer hight but just uploaded the standard 0.16 base with 0.08 layer heights. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmFilaments Used:PLA Kingroon Black Transmission Distance: 0.4PLA Overture Space Gray Transmission Distance: 1.4PLA Overture White Transmission Distance: 4PLA Kingroon Black Transmission Distance: 0.4PLA Overture Red Transmission Distance: 8.2Swap Instructions:Start with BlackAt layer #13 (1.12mm) swap to Space GrayAt layer #17 (1.44mm) swap to WhiteAt layer #21 (1.76mm) swap to BlackAt layer #22 (1.84mm) swap to Red for the rest.Your last slider is set to 2.32mm which is lower than the mo