StraightClock_No_Arc

A friend was printing this clock and wants to have a straight version next to the arced one, so I drew up one in Fusion 360. Because of the measurements (length=320mm) it seems quite challenging to print this item. Especially concerning the first layer. For this reason I adjusted the design a little to make sure the first layers are put more nicely. With three lines on the bottom it holds better to the bed surface. Also, because the item only fits diagonally, I was using a CR-10 with Simplify3d with infill on 0 and -90 degrees. The default +- 45 degrees makes too long lines of filament to be extruded next to each other, which is problematic to stick to the bed, so this also needs some adjusting.