Stranger Things HueForge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 133.33x199.99mm in size You may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 2.24mm and the Actual Thickness is 2mm -------DO NOT CHANGE THE Z VALUE -----------------------You can change the x and y values but NOT the z-value #080a0d PLA PolyLite Black Transmission Distance: 0.8#ec1031 TPU Overture Red Transmission Distance: 5#ffe800 PLA PanChroma Yellow Transmission Distance: 8#e2dedb PLA PolyLite White Transmission Distance: 5This print uses 4 unique filaments Swap Instructions:Start with PolyLite BlackAt layer #8 (0.72mm) swap to Overture RedAt layer #13 (1.12mm) swap to PanChroma YellowAt layer #18 (1.52mm) swap to PolyLite White for the rest.