Stranger Things - Max Mayfield - HueForge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm  The Model is 150x150mm in size  You may print at higher layer heights below the Base Thickness of 1.04mm  The Max allowed Thickness is 2.8mm and the Actual Thickness is 2.8mm #000000 PLA+ Sunlu Black Transmission Distance: 0.6 #d22332 PLA+ Sunlu Red Transmission Distance: 6 #ffd500 PLA+ Sunlu Pure Yellow Transmission Distance: 5 #ffffff PLA+ Sunlu White Transmission Distance: 5 This print uses 4 unique filaments Swap Instructions: Start with Black At layer #16 (1.36mm) swap to Red At layer #21 (1.76mm) swap to Pure Yellow At layer #25 (2.08mm) swap to White for the rest.