Slicer Discord
Strap Buckle (No Supports) – Modelo 3D imprimible de MakerWorld MakerWorld
Other House Models

Strap Buckle (No Supports)

562 Descargas
174 Likes
340 Makes
Ver Modelo
There are two models, one with teeth and one without. I recommend the model with teeth. This will prevent slippage of the straps. Update 28SEP2018: I uploaded a strap keeper to hold the straps together. Although it looks very similar to the original model, this is a complete redesign. I made some changes that suited me better. It has less play and self-centers when clicking the parts together. I also made the button smaller, although it's just as easy to use. The buckle is self-tightening. The harder you pull it apart, the more engaged the locking mechanism becomes. Under load, it will not slip apart unless it catastrophically fails.The engagement has a very satisfyingclick when you connect the two parts together. You could also use this as a belt buckle. I have uploaded two models for each part. The only difference is the strap hole sizes. Most people will probably use the large size. I printed these at 80% scale which produce a strap hole width of 21mm. Native size produces a str
Categoría
Other House Models
Fuente
MakerWorld
Publicado
Actualizado
Lo que necesitas para imprimir: Principiante Baja confianza
¿Por qué?
sin soportes
Sin soportes Pieza única
Soportes 0/3
Ensamblaje 0/3
Ajustes 1/3
Tamaño de cama 0/3
Postproceso 0/3
Impresora
FDM / FFF
Formato de archivo
STL
Material
PLA
Software
Cura, PrusaSlicer o similar
Mismo diseñador, más plataformas

Mistertech también publica en

131 modelos adicionales en 1 plataformas más

Verificado por coincidencia de títulos de modelos entre plataformas.
Aún no hay valoraciones
Aún no hay comentarios – ¡sé el primero!

Modelos similares

6 Sugerencias
Feed Blog Slicer Calculadora Búsqueda por imagen Enviar Contacto Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Añadir a colección