Stray - HueForge

HueForge of a promo art for the video game “Stray” featuring an orange cat. Here is the full description : Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 149.99x149.99mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mmFilaments Used:PLA BambuLab Matte Charcoal Transmission Distance: 0.1PLA BambuLab Basic Brown Transmission Distance: 2PLA BambuLab Basic Red Transmission Distance: 3.8PLA BambuLab Basic Orange Transmission Distance: 5.4PLA BambuLab Matte Mandarin Orange Transmission Distance: 2.9PLA BambuLab Matte Lemon Yellow Transmission Distance: 3.1PLA BambuLab Basic Jade White Transmission Distance: 3.4This print uses 7 unique filamentsSwap Instructions:Start with CharcoalAt layer #15 (1.28mm) swap to BrownAt layer #16 (1.36mm) swap to RedAt layer #17 (1.44mm) swap to OrangeAt layer #20 (1.68mm) swap to Mandarin OrangeAt layer #21 (1.76mm) swap to Lemon YellowAt l