Slicer Discord
Stream Deck with RGB keys – Modello 3D stampabile da Thingiverse Thingiverse

Stream Deck with RGB keys

5 Download
5 Likes
0 Makes
Vai al Modello
Second remix from the Dave's original stream deck. This time with RGB keys!

Use all the Arduino's PINs is good but illuminate all the RGB LEDs are not enough. So, so I used the Adafruit 24-Channel 12-bit PWM LED Driver.

This is a long and boring work to cut and solder all wires. Be strong.

Full pictures here:
https://www.instructables.com/Stream-Deck-With-RGB-Switchs/

Arduino Code For RGB management:
https://github.com/themaire/StreamDeckRGB

Check what you will need and instructions :
https://www.thingiverse.com/thing:4078241

LED Driver :
-- You will understand how to wire in the code.
https://www.adafruit.com/product/1429
https://thepihut.com/products/adafruit-24-channel-12-bit-pwm-led-driver-spi-interface-tlc5947

Mecanical switchs (with LED reservation pocket):
https://fr.aliexpress.com/item/4000297210842.html?spm=a2g0o.9042311.0.0.27426c37fILLjw

LEDs for the switchs :
https://fr.aliexpress.com/item/32834345547.html?spm=a2g0o.9042311.0.0.27426c37fILLj
Fonte
Thingiverse
Cosa serve per stampare: Principiante Bassa affidabilità
Pezzo unico
Supporti 1/3
Assemblaggio 0/3
Impostazioni 1/3
Dimensioni piano 0/3
Post-lavorazione 0/3
Stampante
FDM / FFF
Formato file
STL
Materiale
Software
Cura, PrusaSlicer o simile
Ancora nessuna valutazione
Ancora nessun commento – sii il primo!

Modelli simili

6 Suggerimenti
Feed Blog Slicer Calcolatore Ricerca per immagine Invia Contatto Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Aggiungi alla collezione