SugarAngel #4

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mmThe Model is 200x200mm in size You need to use a 0,2mm NozzleYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 1.5mmFilaments Used: PLA+ Numakers Pitch Black Transmission Distance: 0.1 PLA+ Numakers Midnight Gray Transmission Distance: 0.2 PLA+ Numakers Dark Grey Transmission Distance: 0.5 PLA+ Numakers Simply Silver Transmission Distance: 0.5 PLA+ Numakers Light Gray Transmission Distance: 0.7 PLA+ Numakers Ivory White Transmission Distance: 4 PLA+ Numakers Pure White Transmission Distance: 3.3 PLA+ Numakers Cool White Transmission Distance: 1.8This print uses 8 unique filamentsSwap Instructions: Start with Pitch Black At layer #10 (0.52mm) swap to Midnight Gray At layer #17 (0.8mm) swap to Dark Grey At layer #19 (0.88mm) swap to Simply Silver At layer #21 (0.96mm) swap to Light Gray At layer #23 (1.04mm) swap to Ivory White At layer #26 (1.16mm