Cults3D
€ Paid
Art
Go to Model
Sun-Eater Griffin
0
Downloads
0
Likes
0
Makes
A 3D-printable concept based on the idea: A predatory griffin bust featuring thick, layered golden plumage and a heavy, ornate sun-disk crest integrated into its cranial structure.. Designed as one connected, display-ready object.
This design is offered as a digital file for home 3D printing. It is shaped as one connected object with a broad flat base and thick details, with gentle overhangs to keep the print straightforward on a typical FDM printer.
Recommended print settings (a starting point -- adjust to your printer and filament):
- Layer height: 0.20 mm for general use; 0.12-0.16 mm for finer surface detail
- Infill: 15-20% for display pieces; 30%+ for parts that take load
- Supports: Designed to minimise supports; add tree/auto supports if your slicer flags overhangs
- Suggested materials: PLA, PETG
Orient the flat base on the build plate for the most reliable first layer.
This design is offered as a digital file for home 3D printing. It is shaped as one connected object with a broad flat base and thick details, with gentle overhangs to keep the print straightforward on a typical FDM printer.
Recommended print settings (a starting point -- adjust to your printer and filament):
- Layer height: 0.20 mm for general use; 0.12-0.16 mm for finer surface detail
- Infill: 15-20% for display pieces; 30%+ for parts that take load
- Supports: Designed to minimise supports; add tree/auto supports if your slicer flags overhangs
- Suggested materials: PLA, PETG
Orient the flat base on the build plate for the most reliable first layer.
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
