Sun Lamp Model with Wall Mount

I wanted to make a sun lamp to go along with my Earth and Moon. But I wanted it to be bigger than the other models, and I wanted to mount it in the corner of the room over top the other models. So I made it. The mount is designed to be able to mount on the wall, or even the corner of the room. I used a double stick tape patch to give it extra strength but its not needed. Helped when mounting with the screw though! You can also print the flat base as well, if you don't want it on the wall. I used PETG clear gradient: https://www.amazon.com/dp/B0F6MKQSTM?ref=ppx_yo2ov_dt_b_fed_asin_title Honestly, I would see if you can find another gradient or just try a Orange or yellow. I used these lamps, so I could change the color to more orange/red/Yellow If I wanted: https://www.amazon.com/dp/B0F7SKM268?ref=ppx_yo2ov_dt_b_fed_asin_title I don't recommend PLA, as this model has a thicker shell, use translucent! This printed on my A1 just fine, and i did ludicrous speed for a good portion o