Sun Wall Art - Uses Reflection Stand System Inserts

This Sun Wall art is a Massive 370mm across without scaling! Print the parts and insert the fins into the main body of the print. Then you can use any of the Reflection Stand System: https://thangs.com/designer/Makers%20Mashup/3d-model/Mirror%20Plant%20Stand%20%2F%20Table%20%28Core%20Setup%29%20-%20part%20of%20the%20Reflection%20Stand%20System-875965?manualModelView=true&source=All+Files inserts for your own look and feel. You can even create your own inserts! Uses a 5" Mirror, or you can also 3D Print a plastic mirror with the stand core if you want a solid color backing instead.

The example here is using the Mythosaur insert. All of the pieces will take about 6 hours if you print multiple fins at the same time. 10 of them will fit on an 180x180 print bed. No infill is required. 3 walls recommended with .2 layer height or smaller.

If you would like to request an insert design, leg design, etc. you can do that through my community discord channel https://discord.gg/Z