Thingiverse
Sunflower Coaster
63
Downloads
186
Likes
0
Makes
- A bright sunflower coaster to bring warmth and color to your table.
- Three manual swaps — no AMS or MMU required.
- Print Settings:
- Layer height: 0.08 mm with a base layer of 0.16mm
- Infill: 100%
- Color Changes:
- Start with Black (Esun PLA)
- At layer 9 (0.80 mm), swap to Gray (Esun PLA)
- At layer 12 (1.04 mm), swap to Orange (Polymaker PLA)
- At layer 23 (1.92 mm), swap to Yellow for the rest (Polymaker PLA)
- Coaster Holder:
- Layer height: 0.20 mm
- Infill: 15%
- Notes:
- A 3MF print profile is included for easy setup
- Do not simplify the model (ignore floating regions warning)
- Scale only in X and Y
- Split objects manually by right-click menu
- Use a lighter or a heat gun to remove stringing
- Want to sell prints? Check our profile for a commercial license.
- Three manual swaps — no AMS or MMU required.
- Print Settings:
- Layer height: 0.08 mm with a base layer of 0.16mm
- Infill: 100%
- Color Changes:
- Start with Black (Esun PLA)
- At layer 9 (0.80 mm), swap to Gray (Esun PLA)
- At layer 12 (1.04 mm), swap to Orange (Polymaker PLA)
- At layer 23 (1.92 mm), swap to Yellow for the rest (Polymaker PLA)
- Coaster Holder:
- Layer height: 0.20 mm
- Infill: 15%
- Notes:
- A 3MF print profile is included for easy setup
- Do not simplify the model (ignore floating regions warning)
- Scale only in X and Y
- Split objects manually by right-click menu
- Use a lighter or a heat gun to remove stringing
- Want to sell prints? Check our profile for a commercial license.
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
![Wolverine [funny] HueForge](https://wsrv.nl/?url=https%3A%2F%2Fmakerworld.bblmw.com%2Fmakerworld%2Fmodel%2FUSfc9364ff062d8d%2Fdesign%2F2024-12-29_db25a71d046a9.jpg&w=400&h=300)
