Sunflower hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 120x180mm in sizeYou may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 2.24mm and the Actual Thickness is 1.92mm Filaments Used:#000000 PLA+ Deeplee Black Transmission Distance: 0.1#ff9016 PLA BambuLab Basic Pumpkin Orange Transmission Distance: 4.7#fffb00 PLA Deeplee Yellow Transmission Distance: 5.2This print uses 3 unique filaments Swap Instructions:Start with BlackAt layer #9 (0.8mm) swap to Pumpkin OrangeAt layer #16 (1.36mm) swap to Yellow for the rest. If you want to change the print size, only change the X and Y axis but do not change the Z axis.