Sunflower Plant V1

After creating my piranha plant design, I was on a kick to put together another loved video game plant. You could probably guess where I got the inspiration. I designed the eyes to follow you, no matter where you’re standing in the room. The black part of the eye is inset, while the white part slightly extrudes out. This design can be printed with your basic single extruder printer. While the piranha plant designs found below, will need an IDX or duel extruder printer. Free - https://www.thingiverse.com/thing:5426723 Different Bases - https://cults3d.com/en/3d-model/art/piranha-plant-v2 There’s nothing to complicated about printing this design other than the leaves. I would suggest starting your build there. I aligned the flat parts of the leaf 1 right and leaf 1 left together on the build plate and used a brim to not only have better bed adhesion, but to keep the parts together until I was ready to assemble the plant. I printed both parts of each leaf together, then moved on to the next leaf, so I didn’t get pieces mixed up. Leaf one has one notch cut out, two has two notches, etc. You can check the description of the files to position them correctly in the stem. Assembly should be straight forward, but if you have any questions, just let me know. Thanks for checking out my design! Happy Printing!! You can follow me on instagram, https://www.instagram.com/pla.n.pa/ to find out what I designs I am currently working on If your interested in selling prints of my designs, become a Patreon supporter here… https://patreon.com/planpa3d